BULK PRICING: Please Contact Us

OEM CODE: RTCFFP2S

MANUFACTURER / BRAND: TRIDENT

FEATURES

STANDARDS ACHIEVED

AREAS OF APPLICATION

HOW TO APPLY – DONNING

1. Position the face mask in the palm of your hand with the nose strip at your fingertips, ensuring both head straps are untwisted over the back of your hand.

2. Open both the top and bottom panels of the mask and make a bend in the foam nose seal. Place the lower panel under the chin and the upper panel with the foam nose seal over the nose bridge and underneath the eyes.

3. Holding the face mask with one hand, position the top untwisted head strap to the crown of the head.

4. Draw the lower untwisted head strap up and over the face to below the ears and back of the neck. DO NOT CRISS CROSS HEADSTRAPS.

5. With both hands, mould the foam nose seal at the top of the mask to the nose bridge and cheeks ensuring a secure fit and seal.

6. Perform a fit check (see fit check list below). Cover the front of the face mask with both hands. Inhale and exhale sharply.

HOW TO APPLY – DOFFING

1. The face mask may be contaminated. Touch only the head straps when removing.

2. Pull the bottom strap over the top of the head.

3. Pull the top strap over the top of the head.

4. Dispose of face mask into the appropriate waste receptacle in accordance with site infection control and prevention policies.

5. Wash and sanitise your hands thoroughly.

FIT CHECK LIST

NOTE: To achieve an optimum facial seal, the wearer should be clean-shaven. It is recommended the wearer be fit tested prior to use in accordance with AS/NZS 1715: 2009 and/or onsite requirements. Training on the safe use and limitations of the disposable face mask must be performed in accordance with AS/NZS 1715: 2009 section 2.4.

IMPORTANT

Size: Small

Quantity: 1 Box / 20 Masks

TRIDENT® Face Mask Research Paper Study

In a recently published Research Paper comparing N95/P2 face masks quantitative fit tests the TRIDENT® face masks achieved outstanding results. Professor Daryl White and his colleagues at Melbourne University recruited 500 participants for their comprehensive study. Their finding were consistent with previous research showing very high QNFT pass rates with three-panel flat-fold face masks. Their tests overwhelmingly showed the TRIDENT ® face masks outperformed their 3M competitor “both the overall and first-attempt QNFT pass rates of the Trident P2 face masks were significantly higher than the 3M Aura (99.2% vs 92.6%, p < 0.001; and 92.6% vs 76.4%, p < 0.001 respectively). The overall fit factor and the individual fit factor were also significantly higher for the TRIDENT face masks FFR than the 3M Aura.

Packaging

Item Dimensions LxWxH : 0.00 x 0.00 x 0.00 Centimeters