D-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.T. Professionals with the benefits of Power over Ethernet (PoE), even when other devices in the network do not support it. With PoE technology, low voltage DC power and Ethernet data signals are combined on a single network cable, which facilitates powering of end devices like IP Cameras, wireless Access Points (APs), and VoIP Phones. This reduces cable clutter, eliminates the need for dedicated electrical outlets on the wall, ceiling, or other unreachable places, reduces installation time, and lowers costs.

Powers More Devices

The DPE-301GI offers a plug-and-play PoE solution, capable of transmitting up to 30 W of output power. With support for IEEE 802.3af/at PoE/PoE+ and Gigabit speeds, the DPE-301GI is designed to be deployed in situations with high bandwidth requirements. Adding more power-hungry PoE devices is now easier than ever. Additionally, the DPE-301GI can also be used in combination with the DPE-301GS PoE Splitter to power non-PoE equipment.

PoE Injector and PoE Splitter Tandem

Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially useful when a PoE switch is not available, and the end device is not PoE capable, but the Network Administrator still prefers the benefits of PoE. Simply install the injector close to the network switch, install the splitter close to the end device, and plug in the cables.